IH-45 Gulf Freeway Widening and Reconstruction


IH-45 Gulf Freeway Widening and Reconstruction RS&H, as the prime CEI consultant, is providing Construction Engineering and Inspection Services for the widening of 5.5 miles of IH 45 between Houston and Galveston from six to eight interstate mainlanes and six lanes of frontage roads. The $220 Million project will [...]

IH-45 Gulf Freeway at IH-610 Interchange


Project Details Description Transportation Highways & Local Roads Construction Management Construction Engineering & Inspection CM-Highways & Local Roads Location Houston, TX Client Texas Department of Transportation (TXDOT) Owner Texas Department of Transportation (TXDOT) Delivery Method Design-Bid-Build Construction Value $66M Contact Douglas D. Geiger, PE Transportation Construction Management 407-893-5873 Doug.Geiger@rsandh.com [...]

Wekiva Parkway Section 6 Design-Build


Wekiva Parkway Section 6 Design-Build RS&H is providing construction engineering and inspection services on the Wekiva Parkway Section 6 Design-Build project for FDOT District Five with project limits from west of SR 429 to just west of Longwood-Markham Road. The project includes six miles of limited access toll road which will be [...]

U.S Route 121 and US Route 460 Connector Phase II


U.S Route 121 and US Route 460 Connector Phase II U.S Route 121 and U.S Route 460 Connector Phase II entails the new construction of approximately 56.25 miles of four-lane limited access highway in southwestern Virginia. These design-build and public-private-partnership projects involve the preliminary engineering, design, and construction of two high-priority corridors [...]

I-96 and I-196 Interchange


I-96 and I-196 Interchange RS&H provided as-needed construction inspection to the Grand Rapids TSC for the initial reconstruction of the I-96 and I-196 Interchange in Grand Rapids. The project includes replacing the westbound I-196 over eastbound I-96 bridge by constructing a new bridge carrying eastbound I-96 over westbound I-196. A new [...]

C-470/Santa Fe Flyover Design-Build


C-470/Santa Fe Flyover Design-Build RS&H teamed with Kraemer to provide a new connection between southbound Santa Fe Drive (US 85) and eastbound C-470 in Littleton, Colorado. The flyover bridge spans Santa Fe Drive, C-470, Wolhurst Street, a UPRR bridge, and a BNSF bridge and reaches a maximum height of nearly 70 feet. [...]

Route 29 and Rio Road Grade-Separated Intersection


Route 29 and Rio Road Grade-Separated Intersection RS&H provided Independent Assurance and Independent Verification (IA/IV) services as Owner Representative to VDOT for the US Route 29 Solutions Design-Build project. The US Route 29 Solutions program was made up of three individual design-build projects. The Route 29 and Rio Road Grade-Separated Intersection [...]

Lesner Bridge Replacement


Lesner Bridge Replacement RS&H provided CEI services on the Lesner Bridge Replacement for the City of Virginia Beach. Construction included twin 1,575’ pre-cast, post-tensioned, segmental bridges providing a 45’ clearance over the Lynnhaven Inlet via Shore Drive. Each structure consists of ten spans; nine at 150’ and a channel span of 225’. [...]

Pearl Parkway Multiway Boulevard and Multi-Use Path


Pearl Parkway Multiway Boulevard and Multi-Use Path RS&H completed the design of two projects along Pearl Parkway, a major urban arterial that is a vital transportation corridor. Both sides of the roadway were designed as a multi-way boulevard, also known as a woonerf (or living street), which combines automobiles, bikes, and pedestrians [...]

North Meadows Extension


North Meadows Extension RS&H served as the prime consultant for the North Meadows extension, a new roadway connection from The Meadows to US 85 and I-25. The project included approximately 2 miles of virgin four-lane arterial roadway; two new interchanges with five bridges at BNSF and UP railroads, Plum Creek, US 85, and [...]