Dallas/Fort Worth International Airport Runway 18R-36L Rehabilitation This DFW runway rehabilitation project was an extensive improvement to one of the airport's primary runways, RW 18R-36L which is more than 2.5 miles long. Closing a major facility such as DFW’s Runway 18R-36L for construction requires substantial planning, and DFW needed the construction to be [...]

Colorado Springs Airport RS&H was selected by the City of Colorado Springs to provide design and construction phase services for the Airfield Lighting Control and Monitoring System in 2008, then selected to provide on-call engineering services in 2009, 2014, and again in 2018, which included design, bid and construction phase services. Projects included runway [...]

Palm Beach International Airport RS&H led a team to provide design and construction phase services for multiple airfield and drainage improvements at Palm Beach International Airport. The existing airport layout, between the main runway and terminal complex, has several direct pathways from the terminal apron to Runway 10L-28R. RS&H developed a blended, cost-effective solution [...]

McKinnon St. Simons Airport RS&H worked with the Glynn County Airport Commission and the Georgia Department of Transportation Aviation Program to develop a multi-phase work program to rehabilitate Runway 16-34 at McKinnon St. Simons Island Airport. This secondary runway is critical for many of the smaller aircraft that frequent the airport. The runway [...]

Los Angeles International Airport RS&H provided planning and design services to LAWA for a new taxiway to accommodate unimpeded flow between the North and South Airfields at LAX. The new taxiway also extends Taxiway D on the north side of the project for a future parallel taxiway extension. Design services included demolition of five buildings [...]

Philadelphia International Airport As part of a team of consultants, RS&H provided design services for the Stage 1 Airfield Development Project of the Capacity Enhancement Program for Philadelphia International Airport, a large-hub airport that plays a major role in the national air transportation network. RS&H completed civil and electrical engineering design services for the [...]

John Glenn Columbus International Airport RS&H provided planning, design, and construction administration services for a Terminal Apron Asphalt and Taxiway E Rehabilitation project at John Glenn Columbus Airport. The primary project goal was to extend the life of the pavements adjacent to the existing terminal gate areas until the planned new replacement terminal is in [...]

Austin-Bergstrom International Airport Terminal Apron RS&H was selected as the lead civil engineer on a team of consultants for the airfield portion of a 10-gate Terminal Expansion Program to meet the need for additional gate capacity. As part of the preliminary project planning, RS&H analyzed the existing taxiways, taxilanes, and apron areas to determine [...]

Asheville Regional Airport RS&H completed program management, resident project representation, and construction administration services for a four-phase runway redevelopment program, including a new 8,000-foot by 150-foot runway, connector taxiways, medium intensity approach lighting system with runway alignment indicator lights (MALSR), and instrument landing systems. A new parallel taxiway was constructed for use as a [...]

Toledo Express Airport RS&H serves as the airport’s general consultant and provided engineering, construction administration, and resident project engineering services for the rehabilitation of the airport’s primary runway, Runway 7-25. The rehabilitation program included performing a detailed pavement evaluation, developing rehabilitation options, cost estimates, and design. The pavement investigation and analysis used a combination [...]